
正在加载
microEnable 5 ironman AQ8-CXP6D是一款PCIe图像采集设备,可让最多四台CoaxPress标准化相机实现全带宽连接microEnable 5 ironman AQ8-CXP6D专门用于高速图像采集,可连接4台CoaXPress相机,并提供DMA3600技术,能获得机器视觉应用
| 型号名称 | microEnable 5 ironman AQ8-CXP6D |
| 类别 | 图像采集卡 |
| 处理器 | System Processor |
| 板载内存 | 1 GByte DDR3-RAM |
| 标准 | CoaXPress 1.0/1.1 |
| 配置 | CXP1-6; up to 4 cameras |
| 接头 | 4 x DIN 1.0/2.3 |
| 功率输出 | Power over CXP, 13W/24V per cable, SafePower |
| 相机支持 | line scan camera, area scan camera |
| 芯片类型 | CFA sensor (Bayer), Grayscale sensor, RGB sensor |
| 位深 | 8-16-bit (grayscale), 24-48-bit (color) |
| 数据带宽 | 4 x 6,25 Gbit/s |
| 测试环境 | Camera Simulator |
| PC总线接口 | PCI Express x8 (Gen 2), DMA3600 |
| PC总线接口性能 | up to 3.600 MB/s (sustainable) |
| GPIO同步和控制 | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
| GPIO接口概述 | 8in/8out (max.), TTL or opto-coupled |
| 基本功能 | Tap Sorting (Sensor Readout Correction), Offset/Gain/Gamma correction, Invert, ROI, Image Selector, LUT |
| 尺寸 | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
| 功耗/电源 | 12 V, 2.5 A |
| 操作温度 | 0 - 50°C (32°F - 122°F) |
| 存储温度 | -50 - 80°C (-58°F - 176°F) |
| MTBF | on request |
| 合规 | WEEE, RoHS, REACH |
| 软件驱动程序 | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit), Linux 32-Bit, Linux 64-Bit |
| 软件工具 | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), Documentation, microDiagnostics (Service tool), SDK, Device Drivers |
| 软件API | Silicon Software SDK, .net interface |
| FPGA编程 | not programmable |
| BV-软件兼容性 | Common Vision Blox, Halcon, VisionPro |
价格:商品在爱采购的展示标价,具体的成交价格可能因商品参加活动等情况发生变化,也可能随着购买数量不同或所选规格不同而发生变化,如用户与商家线下达成协议,以线下协议的结算价格为准,如用户在爱采购上完成线上购买,则最终以订单结算页价格为准。
抢购价:商品参与营销活动的活动价格,也可能随着购买数量不同或所选规格不同而发生变化,最终以订单结算页价格为准。
特别提示:商品详情页中(含主图)以文字或者图片形式标注的抢购价等价格可能是在特定活动时段下的价格,商品的具体价格以订单结算页价格为准或者是您与商家联系后协商达成的实际成交价格为准;如您发现活动商品价格或活动信息有异常,建议购买前先咨询商家。